View source for WGS84

The WGS84 is an [http://support.virtual-surveyor.com/en/support/solutions/articles/1000261351-what-is-wgs84- ellipsoid, datum and coordinate system] ([https://web.archive.org/web/20190326005314/http://support.virtual-surveyor.com/en/support/solutions/articles/1000261351-what-is-wgs84- Archive]) that is widely used in cartography, geodesy and navigation fields, including use with Google Maps. WGS84 represents the world with a spherical coordinate system. Such discussions on this topic often revolve around the claim that, since WGS84 provides accurate information and represents the earth as a sphere, it must be evidence that the earth is a sphere. 

When assessing these claims it is found that the process is a complex system which pulls information from a large collection of smaller ''flat maps'' to provide accurate information to users.<sup>[https://wiki.tfes.org/WGS84#The_Earth_is_Not_Round.21]</sup> The spherical coordinates of the WGS84 are projected onto a map with planar coordinates when performing the transformations and providing geospacial data.<sup>[https://wiki.tfes.org/WGS84#Spherical_Coordinates_Projected_To_a_Plane]</sup>

==Definitions==

===Geographic Coordinate System===

A '''Geographic Coordinate System''' is a spherical coordinate system which uses longitude and latitude.

From [http://desktop.arcgis.com/en/arcmap/10.3/guide-books/map-projections/about-geographic-coordinate-systems.htm What are geographic coordinate systems?] ([https://web.archive.org/web/20190326005355/http://desktop.arcgis.com/en/arcmap/10.3/guide-books/map-projections/about-geographic-coordinate-systems.htm Archive]) by ArcGIS:

{{cite|A '''geographic coordinate system''' (GCS) uses a three-dimensional spherical surface to define locations on the earth. A GCS is often incorrectly called a datum, but a datum is only one part of a GCS. A GCS includes an angular unit of measure, a prime meridian, and a datum (based on a spheroid).}}

===Projected Coordinate System===

A '''Projected Coordinate System''' is a planar coordinate system.

From [http://desktop.arcgis.com/en/arcmap/10.3/guide-books/map-projections/about-projected-coordinate-systems.htm What are Projected Coordinate Systems?] ([https://web.archive.org/web/20190326005425/http://desktop.arcgis.com/en/arcmap/10.3/guide-books/map-projections/about-projected-coordinate-systems.htm Archive]) by ArcGIS:

{{cite|A '''projected coordinate system''' is defined on a flat, two-dimensional surface. Unlike a geographic coordinate system, a projected coordinate system has constant lengths, angles, and areas across the two dimensions.}}

===Datums===

A '''Datum''' is an anchor point which ties two systems (geographic and projected) coordinate systems together.

From [http://desktop.arcgis.com/en/arcmap/10.3/guide-books/map-projections/datums.htm Datums by ArcGIS] ([https://web.archive.org/web/20190326005355/http://desktop.arcgis.com/en/arcmap/10.3/guide-books/map-projections/about-geographic-coordinate-systems.htm Archive]) we read:

{{cite|While a spheroid approximates the shape of the earth, a datum defines the position of the spheroid relative to the center of the earth. A datum provides a frame of reference for measuring locations on the surface of the earth. It defines the origin and orientation of latitude and longitude lines.}}

==State Plane Coordinate Systems and NAD83==

State Plane Coordinate Systems are widely used for geographic data, and are based on a flat earth 'plane surveying' methods with simple XY coordinates:

https://en.wikipedia.org/wiki/State_Plane_Coordinate_System ([https://web.archive.org/web/20190326005559/https://en.wikipedia.org/wiki/State_Plane_Coordinate_System Archive])

{{cite|The State Plane Coordinate System (SPS or SPCS) is a set of 124 geographic zones or coordinate systems designed for specific regions of the United States. Each state contains one or more state plane zones, the boundaries of which usually follow county lines. There are 110 zones in the contiguous US, with 10 more in Alaska, 5 in Hawaii, and one for Puerto Rico and US Virgin Islands. The system is '''widely used for geographic data by state and local governments'''. Its popularity is due to at least two factors. First, it uses a simple Cartesian coordinate system to specify locations rather than a more complex spherical coordinate system (the geographic coordinate system of latitude and longitude). '''By using the Cartesian coordinate system's simple XY coordinates, "plane surveying" methods can be used, speeding up and simplifying calculations.'''}}

Lower down in that article we read that the State Plane Coordinate Systems are associated with the North American Datum of 1983:

{{cite|Originally, the '''state plane coordinate systems''' were based on the North American Datum of 1927 (NAD27). Later, the more accurate '''North American Datum of 1983 (NAD83)''' became the standard (a geodetic datum is the way a coordinate system is linked to the physical Earth). More recently there has been an effort to increase the accuracy of the NAD83 datum using technology that was not available in 1983.}}

The United States Government echoes the same association:

https://catalog.data.gov/dataset/united-states-stateplane-zones-nad83 ([https://web.archive.org/web/20190326005609/https://catalog.data.gov/dataset/united-states-stateplane-zones-nad83 Archive])

{{cite|United States Stateplane Zones - NAD83
Metadata Updated: August 11, 2016

'''U.S. State Plane Zones (NAD 1983) represents the State Plane Coordinate System (SPCS) Zones for the 1983 North American Datum within United States.'''}}

==The Earth is Not Round!==

[https://gis.utah.gov/nad83-and-webmercator-projections/ '''The Earth is Not Round! Utah, NAD83 and WebMercator Projections'''] ([https://web.archive.org/web/20190326005612/https://gis.utah.gov/nad83-and-webmercator-projections/ Archive])<br>
By the Utah Automated Geographic Reference Center

Utah's Automated Geographic Reference Center provides an article with a descriptive title of "The Earth is Not Round!" which explains the coordinate systems in use and how the flat earth maps tie into the spherical coordinate systems for data retrieval. NAD83 is the mentioned as the best coordinate system for geospacial data:

{{cite|UTM NAD83 is the best coordinate system for collecting and analyzing GIS data statewide, especially any business need that uses length, area, or geoprocessing.}}

NAD83, as we recall above, is based on a planar coordinate system.

===Anchor Point Datum===

From the 'The Earth is Not Round!' article it is mentioned "The UTM NAD83 projection uses the GRS80 ellipsoid and a center-of-the-earth anchor point as its datum." It has been asked what the ellipsoid and center-of-earth anchor point that is associated with the NAD83 is referring to. If the NAD83 is composed of state plane maps with a flat XY coordinate system, why is there a reference to involvement of a globe model?

The answer to this is that the ellipsoid and anchor point datum associated with NASD84 is necessary to interconnect with other spherical coordinate systems such as WSG84, in order to connect correctly at the correct location and interchange data.

The article discusses the round earth datum:

{{cite|Geographic coordinates use latitude and longitude values to define positions on the 3D surface of the earth, which is of course, best modeled as an ellipsoid, not a sphere. The ellipsoid and its accompanying '''anchor point''' that ties it in to the ''real world'', are known collectively as the WGS84 datum.}}

Note "real world."

The article also discusses the flat earth datum:

{{cite|UTM NAD83 is a projected coordinate system that represents physical locations abstracted to a '''flat, cartesian coordinate system.''' The UTM NAD83 projection uses the GRS80 ellipsoid and a center-of-the-earth '''anchor point''' as its datum}}

The passage is speaking of ''anchor points'' to connect the two types of systems together.

The accompanying image is the flat map with anchor point:

[[File:NAD83 Datum.png]]

===WGS84 Requires Flat Maps===

WGS84 relies on flat projections to give out accurate data.

https://www.gpsworld.com/data-collection-of-wgs-84-information-or-is-it/ ([https://web.archive.org/web/20190326005733/https://www.gpsworld.com/data-collection-of-wgs-84-information-or-is-it/ Archive])

{{cite|In the meantime, here are a few of the main differences between WGS 84 and NAD83:

The coordinate system for WGS 84 is '''geographic''', and the NAD83 system is '''projected'''.}}

As we will recall from the [https://wiki.tfes.org/WGS84#Definitions definitions section], a geographic coordinate system is spherical and a projected coordinate system is flat. WGS84 has a spherical coordinate system and NAD83 has a flat coordinate system.

WGS84 itself does not define a projection, and requires a flat coordinate system for operation:

https://www.gpsworld.com/data-collection-of-wgs-84-information-or-is-it/ ([https://web.archive.org/web/20190326005733/https://www.gpsworld.com/data-collection-of-wgs-84-information-or-is-it/ Archive])

{{cite|'''WGS84 doesn't define a projection''', so it's up to the GIS software to decide which projection to use for displaying the data on the screen (unless you manually pick a projection, of course).}}

Take a look at the list of projections for the ARCGIS software:

[http://desktop.arcgis.com/en/arcmap/latest/map/projections/pdf/geographic_transformations.pdf ArcGIS 10.7.0 and ArcGIS Pro 2.3 Geographic and Vertical Transformation Tables] ([https://web.archive.org/web/20180127083515/http://desktop.arcgis.com/en/arcmap/latest/map/projections/pdf/geographic_transformations.pdf Archive])

These are the world-wide transformation tables used with ARCGIS, of which NAD83 is listed as one of them. These are all flat coordinate systems and their associated transformations. WGS 84 is taking data from flat systems, because as the "Earth Not Round!" article says, these flat systems that are more accurate and give out more accurate figures.

==Spherical Coordinates Projected To a Plane==

We find further references that the process actually involves projecting a curved surface of geodetic positions onto a plane:

[https://www-group.slac.stanford.edu/met/Align/GPS/CCS83.pdf '''Caltrans Surveys Manual'''] ([https://web.archive.org/web/20190326005904/https://www-group.slac.stanford.edu/met/Align/GPS/CCS83.pdf Archive])

{{cite|The State Plane Coordinate System was established to provide a means for transferring the geodetic positions of monumented points to plane coordinates that would permit the use of these monuments in plane surveying over relatively large areas without introducing significant error.

A plane-rectangular coordinate system is by definition a flat surface. '''Geodetic positions on the curved surface of the earth must be “projected” to their corresponding plane coordinate positions.''' Projecting the curved surface onto a plane requires some form of deformation. Imagine the stretching and tearing necessary to flatten a piece of orange peel. In California the Lambert Conformal map projection is used to transform the geodetic positions of latitude and longitude into the y (Northing) and x (Easting) coordinates of the CCS83.}}

Geographic (spherical) coordinates are projected '''''to''''' the plane coordinates. Not the other way around. Further, they "must" be projected.

The [http://wvgis.wvu.edu/data/otherdocs/standardsandpubs/wv_coordinate_systems_jan02.html '''West Virginia GIS Technical Center'''] ([https://web.archive.org/web/20190326005907/http://wvgis.wvu.edu/data/otherdocs/standardsandpubs/wv_coordinate_systems_jan02.html Archive]) mentions the same projection of spherical coordinates onto a plane:

{{cite|Geographic Coordinate System (GCS): An unprojected coordinate system that uses latitude and longitude to define the locations of points on a sphere or spheroid. The use of longitude and latitude is encouraged for general reference and distribution of national framework data because it provides a seamless coordinate system for most of the United States. '''Geographic coordinates can be readily projected onto a planar coordinate system to display data properly or measure distances accurately.''' The Geographic Coordinate System is the recommended coordinate system for unprojected GIS data sets that cover the entire geographic extent of West Virginia.}}

We read that the geographic (round earth) coordinates can be projected onto a planar (flat earth) coordinate system to accurately display distances.

The reader should ponder why spherical coordinates are projected onto a plane, and how spherical coordinates projected onto a planar coordinate system could display data and distances accurately if the earth is a globe. If the earth is a globe, the opposite should be true. Projecting spherical coordinates onto a plane should make data and distances more inaccurate, not accurate.

==Basic idea behind geographic coordinates==

http://www.cadalyst.com/gis/spatial-technologies-mapmaking-and-gis-8853 ([http://archive.fo/aiZni Archive])

{{cite|THE WORLD IS not flat, this we know. Representing our round world on a flat map has always been difficult, and GIS practitioners today face the same challenges as cartographers did hundreds of years ago. To map the world more accurately, GIS uses a variety of geographic coordinate systems and projections. '''The basic idea behind geographic coordinates is to convert a 3D sphere or spheroid into a flat map.'''}}

The article goes on at length to talk about the round WGS85 and the flat NAD83 coordinate systems

==Classified Coordinate Transformations==

Of interest, some coordinate transformations are not publicly known. 

http://desktop.arcgis.com/en/arcmap/latest/map/projections/choosing-an-appropriate-transformation.htm ([https://web.archive.org/web/20190326005909/http://desktop.arcgis.com/en/arcmap/latest/map/projections/choosing-an-appropriate-transformation.htm Archive])

{{cite|Why are there so many transformations?

Between any two geographic coordinate systems, there may be zero, one, or many transformations. Some geographic coordinate systems do not have any publicly known transformations because that information is considered to have strategic importance to a government or company.}}

==Flat Maps as Standard==

We find several sources which describe that flat maps are the standard in GIS work.

From https://www.e-education.psu.edu/geog862/book/export/html/1644 ([https://web.archive.org/web/20190326011941/https://www.e-education.psu.edu/geog862/book/export/html/1644 Archive]) we read:

{{cite|Welcome to Lesson Six of this GPS course. And this time, we'll be talking about two coordinate systems. And I have a little bit of discussion concerning heights. We've touched on that a little bit. Now these coordinate systems that we're going to discuss are plane coordinate systems based upon the fiction that the earth is flat, which, of course, immediately introduces distortion. ''However, much of GIS work—and GPS work as well—is done based upon this presumption.''}}

A [https://www.pobonline.com/articles/86585-geodetic-surveying-made-plain comment by a surveyor named Jerry McGray, RPLS] ([https://web.archive.org/web/20190326011944/https://www.pobonline.com/articles/86585-geodetic-surveying-made-plain Archive]):

{{cite|A decade or two ago, I was the instructor for some introductory surveying courses at a community college. In the first class we would define “plane surveying” as surveying that did not take into consideration the curvature of earth, and “geodetic surveying” as that which did. That was about the only time the two categories received anywhere near equal attention. Oh, we would point out (still in that first lecture) some of the real-world evidence of a non-flat earth, such as the fact that the length of an 11.5-mile arc on the earth's surface is only five hundredths of a foot longer than its subtended chord, or that the sum of the angles in a spherical triangle on the earth’s surface having an area of 75 square miles is only one second greater than the angle sum of the same size plane triangle. (Even today I get a kick out of those dramatic tidbits. I’m sure a real geodesist would roll his or her eyes at such trivia!) But those examples were used as reasons for not focusing—no, for not mentioning—geodetic concepts for the rest of the semester. We would end the ten-minute token nod to geodetic surveying with the tongue-in-cheek remark, “Therefore, for this class, we will respect the time-honored principle handed down through the ages—that the earth is flat.” And, truth be known, that’s probably not a bad narrowing of a dauntingly broad subject.

But more than narrowing, it was simply that few rank-and-file surveyors in private practice ever had occasion to use geodetic concepts in their daily work. Even when we dutifully enrolled in the occasional State Plane Coordinate seminar, the principles quickly faded from memory from lack of use. If a surveyor from the general population had ever even heard of the geoid and its relationship to the ellipsoid, and where mean sea level fit into the picture, hearing about it was as far it went.}}