The Flat Earth Wiki
The Flat Earth Wiki
Log in

Difference between revisions of "Bridges"

From The Flat Earth Wiki
Line 1: Line 1:
Sema Essien, Civil Engineer, and Program Manager at DC Water [https://www.quora.com/How-was-the-Danyang%E2%80%93Kunshan-Grand-Bridge-in-China-engineered-to-curve-with-the-Earth-104-miles-long says] ([http://archive.fo/dYc3A Archive]):
+
Sema Essien, Civil Engineer, and Program Manager at DC Water remarks in a tread ''[https://www.quora.com/How-was-the-Danyang%E2%80%93Kunshan-Grand-Bridge-in-China-engineered-to-curve-with-the-Earth-104-miles-long How was the Danyang–Kunshan Grand Bridge in China engineered to curve with the Earth (104 miles long)?]'' ([http://archive.fo/dYc3A Archive]):
 
 
''RE: How was the Danyang–Kunshan Grand Bridge in China engineered to curve with the Earth (104 miles long)?''
 
  
 
{{cite|As a civil engineer, I have never taken the curve of the earth into any calculation. There is no calculation for the curve of the earth. You take two points and you build toward each other. In the middle may be some additional elevation of the roadway on the bridge to account for pitch, drainage of water and the overall stability (as most suspension bridges), but the ends are pretty much surveyed to be two level points measured at an elevation height above sea level. The footings of the bridge must be level or the design will be flawed. So there’s no curve.}}
 
{{cite|As a civil engineer, I have never taken the curve of the earth into any calculation. There is no calculation for the curve of the earth. You take two points and you build toward each other. In the middle may be some additional elevation of the roadway on the bridge to account for pitch, drainage of water and the overall stability (as most suspension bridges), but the ends are pretty much surveyed to be two level points measured at an elevation height above sea level. The footings of the bridge must be level or the design will be flawed. So there’s no curve.}}

Revision as of 05:21, 25 February 2021

Sema Essien, Civil Engineer, and Program Manager at DC Water remarks in a tread How was the Danyang–Kunshan Grand Bridge in China engineered to curve with the Earth (104 miles long)? (Archive):

  “ As a civil engineer, I have never taken the curve of the earth into any calculation. There is no calculation for the curve of the earth. You take two points and you build toward each other. In the middle may be some additional elevation of the roadway on the bridge to account for pitch, drainage of water and the overall stability (as most suspension bridges), but the ends are pretty much surveyed to be two level points measured at an elevation height above sea level. The footings of the bridge must be level or the design will be flawed. So there’s no curve. ”

Sema Essien's name can be found with a search in the DC Water 2018 Org Chart (Archive) and a DC Water 2019 Employee Roster (p.4)(Archive).

Curves in Bridges

Curved bridge.jpg

Sema Essien writes:

  “ When you observe curves in a bridge, its because we design the bridge to be sturdier by putting in an arch as can be seen in some suspension bridges. However the end points on the bridge remain at the same height above sea level. ”